First assemble the computer parts.
For ease of use during Windows installation, Merging recommends that you install security dongles, NET-MSC GBEX1, MT-USBSync board and Pyramix-Ovation keyboard after the Windows Installation.
This motherboard is only compatible with Windows 10, and 8th generation Intel CPUs.
MassCore users : Pyramix 11.x/ Ovation 6.x or above required (RTX64 3.x).
Intel Optane : Optane has been validated in Optane Memory mode only, not in Drive cache mode.
Please only install the Intel Optane Memoryb driver, and not the Intel Optane driver.
Merging highly recommends you "defer feature updates" in Windows 10.
Validated BIOS versions : 1.70/ 2.0 /3.10 - Please consult firstname.lastname@example.org for other BIOS support.
First update BIOS if required.
When updating the BIOS, all settings are lost or not set correctly, you have to enter all the parameters again manually.
Merging recommends you unplug all drives before updating BIOS.
Merging Technologies will not be hold responsible for any trouble or error during a BIOS update.
!Merging Technologies does not guarantee any issue or instability if any overclocking is enabled!
Sealevel GPIO 8206 & 8206FX are NOT compatible with this motherboard, because of their incompatibility with Intel USB chipsets.
Other SeaLevel GPIO are compatible, see our supported controllers table for details on supported models.
BIOS first opens in the EZ mode page, a summary of the system information.
You may adjust date and time.
Please switch to Advance Mode (F6)
1.1. Main page
System information only.
1.2. OC Tweaker
Load Opimized CPU OC Setting: Disabled (only displayed if your CPU supports this feature)
1.2.1 CPU Configuration
Multi Core Enhancement : Enabled (only displayed if your CPU supports this feature)
CPU Ratio : Auto (only displayed if your CPU supports this feature)
CPU Cache Ratio : Auto (only displayed if your CPU supports this feature)
Minimum CPU Cache Ratio : Auto (only displayed if your CPU supports this feature)
BCLK Frequency : 100.0
BCLK Spread Spectrum : Disabled (only displayed if your CPU supports this feature)
Boot Performance Mode : Max non-Turbo Performance
Reliability Stress Restrictor : Disabled (only displayed if your CPU supports this feature)
FCLK Frequency : 800Mhz
AVX Ratio Offset : Auto (only displayed if your CPU supports this feature)
BCLK Aware Adaptiver Voltage : Disabled (only displayed if your CPU supports this feature)
Ring to Core Ratio Offset : Disabled (only displayed if your CPU supports this feature)
Intel Speed Step Technology : Disabled
Intel Turbo Boost Technology : Disabled
Intel Speed Shift Technology : Disabled
Long Duration Power Limit : Auto
Long Duration Maintained : Auto
Short Duration Power Limit : Auto
CPU Core Current Limit : Auto
1.2.2 DRAM Configuration
DRAM Tweaker : No settings to change. Leave default values.
Load XMP Setting : Auto
BCLK Frequency : 100.0
DRAM Reference Clock : Auto
DRAM Frequency : Auto
Primary Timing : No settings to change. Leave default values.
Secondary Timing : No settings to change. Leave default values.
Thrid Timing : No settings to change. Leave default values.
Fourth Timing : No settings to change. Leave default values.
Advanced Setting : No settings to change. Leave default values.
1.2.3 Voltage Configuration
CPU Vcore Voltage : Auto
CPU Load-Line Calibration : Auto
DRAM Voltage : Auto
DRAM Activation Power Supply : Auto
PCH +1.0 Voltage : Auto
VCCIO Voltage : Auto
VCCST Voltage : Auto
VCCSA Voltage : Auto
1.3.1 CPU Configuration
Intel Hyper Threading Technology : Enabled (only displayed if your CPU supports this feature)
Active Processor Cores : All
CPU C States Support : Disabled
CPU Thermal Throttling : Disabled
Intel Virtualization Technology : Enabled
Hardware Prefetecher : Enabled
Adjacent Cache Lime Prefetch : Enabled
Software Guard extension (SGX) : Disabled
1.3.2 Chipset Configuration
Primary Graphics Adapter: Onboard or PCI Express if you use a separate graphic card (a PCI Express graphic card is recommended)
Merging recommends you use the PCIE1 slot for the graphic card.
Top of lower Usable Dram : Dynamic
Above 4G Decoding : Disabled
PCIE1 to PCIE5 Link Speed : Auto
PCI Express Native Control : Disabled
PCIE ASPM Support: Disabled
PCH PCIE ASPM Support: Disabled
DMI ASPM Support: Disabled
PCH DMI ASPM Support: Disabled
IOAPIC 24-119 Entries : Enabled
Share Memory : Memory allowed to the onboard graphics. Set to 1024M if you use onboard graphics and Auto for dedicated graphic card.
IGPU Multi-Monitor : Disabled
Onboard LAN : Enabled
Onboard HD Audio: Auto
Front Panel HD : HD
Deep Sleep : Disabled
Restore on AC/Power Loss : set it to Power On if you want the system to restart after a power failure.
1.3.3 Storage Configuration
SATA Controller: Enabled
SATA Controller Speed: Auto
SATA Mode Selection: AHCI / Intel RST Premium (RAID)
If you plan to use RAID array, you should install Windows with this setting set to Intel RST Premium (RAID)
If you plan to use Intel Optane Memory, you should install Windows with this setting set to Intel RST Premium
WARNING: Since PMX V11/ Ovation V7, MassCore users running a RAID configuration must use a dedicated RTX dongle (SSK-HUD-RTX) to authorize MassCore.
This issue only affects the system (Windows ) RAID drives, if you have RAID Data drives, a dedicated dongle is not required.
Launch Storage OpROM Policy : Legacy only (displayed only when SATA mode is set to RAID) (For Intel Optane Memory, this setting must be set to UEFI only)
SATA Aggressive Link Power Management : Disabled
Hard Disk S.M.A.R.T. : Enabled
SATA_0 to 5 :
External SATA : enable if the drive uses eSATA (External Drives for example).
Hot plug: enable if you need Hot-Plug capability (Drive trays for example).
SATA device type : set to Solid State Drive or Hard Disk Drive
1.3.4 Super I/O Configuration
Serial Port : Enabled
Serial Port Address : 3F8h/IRQ4
Parallel Port : Disabled
1.3.5 ACPI Configuration
Suspend to RAM: Disabled
ACPI HPET Table : Enabled (BIOS 1.70 only, this option has been removed in BIOS V2.0)
PS/2 Keyboard Power On: Disabled
PCIE/PCI DevicesPower On: Disabled
Ring-In Power On: Disabled
RTX Alarm Poer On : By OS
USB Keyboard / Remote Power On: Disabled
USB Mouse Power On: Disabled
1.3.6 USB Configuration
Legacy USB Support: Enabled (if set to disable, no USB Support until OS is booted)
PS/2 Simulator : Disabled
XHCI Hand-off: Disabled
USB Single port Control : all should be set to Enabled
1.3.7 Trusted Computing
Security Device Support : Disable
1.3.8 UEFI Configuration
UEFI Setup Style : Advanced Mode
Active Page on Entry : Main
Full HD UEFI : Auto
1.4.1 UEFI Tech Service
ASRock support contact
1.4.2 Easy RAID Installer
Help to copy the RAID Driver (F6) on a USB drive to install OS in RAID mode
1.4.3 Boot Manager
Boot Manager is specifically designed for the dual OS platform/multi-OS platform users to easily customize and manage the boot menu, when using several boot devices.
Merging recommends to set to Disabled.
1.4.4 UEFI Update Utility
Instant Flash : BIOS update
Instant Flash DHCP : allows to update BIOS through Internet Connection. Use at your own risk.
Network Configuration : allows to configure network connection for BIOS update through internet.
1.5. H/W Monitor
Allows to fine tune each fan on the computer.
Merging recommends to set CPU Fan1 to Standard mode or higher (Performance or Full Speed)
Over Temperature Protection : Enabled
Case Open Feature : set according to your needs.
Administrator / User Password : set according to your needs
Secure Boot option : Disabled (may prevent any backup or drive cloning on Windows 10 : use with caution if Enabled)
Intel® Platform Trust Technology : Disabled
Boot Options #: You should first set the optical drive as your first boot device, then the system drive.
Do not use Windows Boot Manager or use UEFI, unless you are sure you want to run in EFI mode.
CD/DVD Rom Drive Priorities / Network device BBS Priorities / Hard Drive Priorities
If you have several device, you can decide for each type the devices priority.
Network devices can be disabled.
USB Devices Priorities option will only be displayed when a USB device is plugged when starting the computer.
Fast Boot: Disabled. If this setting is enabled, Windows will boot much faster, but you will not have access anymore to BIOS, RAID configuration page and Windows Boot menu.
Boot from onboard LAN : Disabled
Setup Prompt Timeout : set according to your needs (usually 1 second is enough)
Bootup NumLock : Enabled
Boot Beep : Disabled
Full Screen Logo : enables or disables splash screen when starting the computer.
AddOn ROM Display : Enabled
Boot Failure Guard Message :
This setting restores all BIOS setting to default after several BIOS boot failure, meaning you will lose all your BIOS setting in that case. Merging recommends to set it to Disabled. Use with caution if you enable it.
CSM (Compatibility Support Module) :
CSM : Enabled
Launch PXE OpROM Policy : Do not launch
Launch Storage OpROM Policy : Legacy only
Launch Video OpROM Policy : Legacy only
1.8 Saving your BIOS/UEFI settings
You can save your BIOS settings in the OC Tweaker page, into the motherboard ROM or on a USB drive (must be formatted as FAT32)
After a BIOS update, those settings might be lost or incompatible with the updated BIOS version.
Windows 10 users may install from Windows 10 CD or USB bootable drive.
Merging recommends to download the latest drivers from
Merging recommends to install WHQL (Driver certified by Microsoft) .
Install the drivers ONLY, do not install the utilities it can cause much trouble.
Do not install Intel® Control Center.
Do not install Intel® Wireless Lan driver.
Do not install the AppCharger, ASRock 3TB+ Unlocker Utility, ASRock A-Tuning utility, App Shop!
Intel Optane has not been tested yet, do not install it.
For MassCore users : do not install Intel® Advanced Network Services included in Intel® LAN driver, it may slow down the whole system.
Norton Security is not mandatory at all, you may use another antivirus software, correctly configured.
Restart to UEFI is designed to be used when you are utilizing the fast or ultra fast boot options in your UEFI. This causes the system to post so quickly that you do not have time to press a key to enter the UEFI. The app, when used will restart the PC directly into the UEFI without you needing to press anything.
If you have installed a PCIe graphic card, you should now install its driver.
See the Graphic cards recommendations and Graphic cards recommended settings.
Now you can follow our Windows configuration guides
4.1 INSTALL PYRAMIX / OVATION / VCUBE
After the installation plug Security dongles, NET-MSC-GBEX1 and other Merging hardware.
(not the Ovation-Pyramix Keyboard!)
See dedicated install guide / user manual for further details.
The NET-MSC-GBEX1 card can be fitted in PCIe1x.
RTX64 dongle (SSK-HUD-RTX) users :
-Version prior to RTX64 V3 : the user must install the specific HASP HL drive before installing MassCore.
-RTX64 V3.x : driver included in MassCore Runtime installation, please plug the dongle when installing MassCore.
Select the “Windows GUI” installer
Black Magic Decklink Studio/Decklink Studio 4K should be placed in PCIe slot 4.
Black Magic Mini-Monitor can be placed in any PCIe slot.
Black Magic driver has to be installed separately; it is not included in Merging installers.
4.1.1 Authorization Keys
Insert the authorization keys in MT Security Settings.
MassCore users can go now in MT Security MassCore tab and click on Install MassCore Runtime.
Restart the computer after MassCore installation.
Windows must be activated to be able to install MassCore.
See the MT Security Troubleshooting in case of issues.
4.2 THIRD PARY SOFTWARE
Install Google Chrome
If there are several users on the computer, you need to use the alternate Chrome installer for all users : http://www.google.com/chrome/eula.html?system=true&standalone=1
Set merging.com as start page !
You may also install additional VST Plugins now.
If you have controllers, you can install the required software (Eucon, NetSmart, GPIO,....)
Networked controllers cannot use the same IP addresses range as the RAVENNA Network.
See this page for further details.