Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Validated BIOS version : 1.50    - Please consult for other BIOS support.
First update BIOS if required. 



When updating the BIOS, all settings are lost or not set correctly, you have to enter all the parameters again manually.

Merging recommends you unplug all drives before updating BIOS.

Merging Technologies will not be hold responsible for any trouble or error during a BIOS update.


!Merging Technologies does not guarantee any issue or instability if any overclocking is enabled!

Sealevel GPIO 8206 & 8206FX are NOT compatible with this motherboard, because of their incompatibility with Intel USB chipsets.
Other SeaLevel GPIO are compatible, see our supported controllers table for details on supported models.

BIOS first opens in the EZ mode page, a summary of the system information.
You may adjust date and time.
Please switch to Advance Mode (F6)


After the installation plug Security dongles, NET-MSC-GBEX1 and other Merging hardware.
(not the Ovation-Pyramix Keyboard!)
See dedicated install guide / user manual for further details.
The NET-MSC-GBEX1 card can be fitted in PCIe1x.
RTX64 dongle (SSK-HUD-RTX) users must install the specific HASP HL drive before installing MassCore.
Select the “Windows GUI” Windows GUIinstaller
Black Magic Decklink Studio/Decklink Studio 4K should be placed in PCIe slot 4.
Black Magic Mini-Monitor can be placed in any PCIe slot.
Black Magic driver has to be installed separately; it is not included in Merging installers.