Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

In Pyramix Native, you can also use the LTC in and out coming from your Horus or Hapi device.

Info
titlePrerequisites

Pyramix 9.1.x or above required
SUB D15 Sync breakout cable (CON-D15-VTC)

 

  1. Plug your the Sub D15 Sync cable on your Horus/Hapi
  2. Plug your LTC input and or output on this cable
  3. Start Pyramix
  4. Connect the Horus/Hapi LTC to MassCore :

    Expand
    titleWith Ravenna Easy Connect
    Start Ravenna Easy Connect
    Browse to the Timecode section and expand it
    Select both LTC in and LTC out and click on Connect selected.
    The computer name will be displayed next to LTC In and Out once connected.

    Expand
    titleWith Aneman

    Start Aneman
    Select the MassCore and the Horus / Hapi device in the world view, to populate the routing matrix.
    Connect both LTC in and LTC out in the matrix (Timecodes are at the end of the inputs and outputs list).
    Don-t forget to click on Apply changes once done.

  5. For Pyramix to chase an incoming LTC plugged on your device, open Pyramix Transport Window and click on the MASTER selection, to set it to LTC READER.
    Pyramix can now chase such TC by clicking on the Chase button of the Transport window.


 

Note

It is highly recommended to use a common video ref between Horus/Hapi, MassCore and the other devices that will use the TimeCode.
Otherwise, the synchronization between the devices will drift over time.