Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


titleGeneral Info.

This is in no case an exhaustive configuration procedure, It's a simple guide on how to configure these switches to use them with Ravenna/AES67 networks.
This guide applies to both CBS350-8T-E-2G and CBS350-8P-E-2G / CBS350-8P-2G


Before Starting

Important! If you have problems accessing the switch for configuration when connected to the Merging MassCore PCIe Ethernet card (NET-MSC-GBEX1) please connect it to the PC’s on-board Ethernet port. When configuration is completed reconnect the switch to the MassCore Ethernet card.


Note: For Cisco CBS350 Switches other than the CBS350-8T/P-E-2G/P-2G please use the manual configuration procedure.