Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
If you have several networks connected to your computer, the operating system uses the IP addresses to sort the network datas data and send it to the correct network.
If two networks are connected to one computer, the root of the IP addresses have to be different, otherwise the computer will not be able to determine where to send the network datasdata.
Imagine a town that would have 2 streets with the same name !

...

Panel
bgColor#fff

We first need to know what is the IP address range used by your data / home network.
Unplug or shut down your MERGING+NADAC
 

Expand
titleOn a Windows 7 Computer

Click on the network icon in right corner of Windows Taskbar and select Open Network and Sharing Center

In Network and Sharing Center, click on Change adapter settings, on the left part of this page.


Now right click on your data / home Network adapter and select Status : the speed indicated should be 1.0Gbps.


Click on the Details button, see now your computer IP Address (IPv4 Address)
 


Expand
titleOn a Windows 8 or 8.1 computer

On a Windows 8 or 8.1 computer
WINDOWS 8 / 8.1 IS NO LONGER SUPPORTED SINCE ASIO V11.0.2 3156

Right click on the network icon in right corner of Windows Taskbar and select Open Network and Sharing Center 

In Network and Sharing Center, click on Change adapter settings, on the left part of this page.


Now right click on your data / home Network adapter and select Status.

Click on the Details button, see now your computer IP Address (IPv4 Address)





Expand
titleOn a Windows 10 computer

On a Windows 10 computer

Click on the network icon in right corner of Windows Taskbar and click on Network settings

In Network and Sharing Center, make sure Ethernet is selected, and click on Change adapter options


Now right click on your data / home Network adapter and select Status.


Click on the Details button, see now your computer IP Address (IPv4 Address)




Expand
titleOn a MacOS Computer
  • On a MacOS computer, Click on the Apple icon  on the top left corner and select System Preferences, then Network.


    On the left pane, select your data / home Network adapter
    see now your computer IP Address


 




Getting the IP address of your MERGING+NADAC

Panel
  1. Plug the MERGING+NADAC network cable on your computer secondary Ethernet port
  2. Start your MERGING+NADAC
  3. Long press the MERGING+NADAC rotary button to access the menu.
  4. Select Setup and short press the MERGING+NADAC rotary button. 
  5. Select Network and short press the MERGING+NADAC rotary button. 
  6. You can now see the MERGING+NADAC IP address

 

 



Determining if you need to change the IP address range

Panel

Now that we get both your computer and the MERGING+NADAC addresses, we need to compare it.
The two first numbers of your Home/Data network IP address CANNOT match the two first numbers of your MERGING+NADAC, assuming MERGING+NADAC have a dedicated Ethernet port on your computer.
xxx.xxx.xxx.xxx

Examples:

Home/Data network IP is 192.168.0.10 and MERGING+NADAC is 169.254.25.20 OK
Home/Data network IP is 10.0.25.20 and MERGING+NADAC is 169.254.25.20 OK
Home/Data network IP is 169.254.15.10 and MERGING+NADAC is 169.254.25.20  NOT OK
Home/Data network IP is 192.168.0.10 and MERGING+NADAC is 192.168.10.20  NOT OK

The IP address 127.0.0.0 should NEVER be used.

 
If you need to change MERGING+NADAC IP address, please see this page.

 

 

 

 

 






Related articles

Content by Label
showLabelsfalse
max5
spacesPUBLICDOC
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel = "nadac" and type = "page" and space = "PUBLICDOC"
labelsnadac

...