Page tree
Skip to end of metadata
Go to start of metadata

NADAC is delivered with a DC input capability, a 4 pins connector (HR10A-7R-4S) is installed left to the AC power connector. The mating part which can be ordered separately is a Hirose HR10-7P-4P.

The DC Power input is only available on MERGING+NADAC, not on MERGING+PLAYER.
If you want to use a dedicated power supply, have a look at our MERGING+POWER device.


The pinout of this connector is:

-         Pin 1: GND

-         Pin 4: 12V

-         Pins 2 and 3: not connected

The DC power input accepts voltages from 10V to 14V for a maximum power consumption of 30W.