Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Problem

When playing back from the NADAC+PLAYER, you sometimes gets clicks in the audio.

Solution

The internal CPU might be overloaded if you did ask Roon specific processing on the audio.

  • Access Roon Signal Path, by clicking the Star icon in the Transport section, next to the song's title.
    The additional audio processes will be displayed in the signal path.
    This icon is only visible during playback.
  • Please take a look at the Processing Speed value :
    Above 1.0 x, the NADAC+PLAYER CPU can handle the additional audio processes.
    Below 1.0 x, the NADAC+PLAYER CPU is overloaded and the audio cannot be processed properly.
  • In that case, access the settings by clicking the bullet icon on the right side of your Zone and select DSP Engine.


  • In the DSP Engine window, disable processes:
    To disable any process, set the DSP Engine on the top left to Disabled.
    To disable a single process, select the process in the left column, then set it to Disabled.

  • Additional Notes:
    Parametric EQ, Crossfeed and Sampling rate conversion are the most demanding processes.
    Higher audio frequencies requires more processing power, especially for DSD sampling rates.
    When importing tracks with Background Audio Analysis active in Roon, the CPU performances might be lowered during the import process.




 

 

  • No labels