Page tree
Skip to end of metadata
Go to start of metadata


Navigation buttons


Set the device base frequency to 44.1 or 48 kHz.

Set the base frequency Multiplier (X2 - X4 - X8 - ... to reach 44.1, 88.2, 176.4, 352.8, 705.6, 1'411.2 or 48, 96, 192, 384, 768, 1'536)

 For future use

 Arrow button / Enter, to apply any changes made on the other buttons



Front panel


Sampling rates: 44.1kHz, 48kHz, X2, X4, X16, X32

ULN: Ultra Low Noise status. MERGING+CLOCK-U (ULN) edition only. Off means CLOCK-L, yellow lit means CLOCK-U.

N/10: 10 MHz signal generation status.

RVN: RAVENNA PTP clock generation status (not yet supported).


Display brightness

You can adjust the brightness of the MERGING+CLOCK front panel (triangle, buttons and screen) by pressing the bottom right corner of the triangle logo.
There are 16 cycling steps of brightness level.



Changing CLOCK parameters

There will be a 5 seconds timeout before having a new setting active when changed from the Clock front panel.